Kit containing 4 corner brackets and 6 metal connectors (45 or 35 mm) for a self-supporting structure for an anti-wave canopy.

Kit containing 4 corner pieces and 6 metal connectors for a self-supporting structure for an anti-wave canopy (for 45x45 or 35x35 mm square battens, not supplied).

Each corner bracket is placed at the 4 upper corners of the structure to be formed and the 6 metal connectors are placed on the floor.

This avoids having to place a wooden batten on the floor on each side of the bed (lengthwise).

Standard 44x44 or 34x34 mm wooden battens, to be purchased by the customer from a DIY store, are inserted into the corner brackets to form the edges of the structure.

The wooden battens should be cut to the desired length.

The structure will therefore be extremely sturdy and practical, allowing the canopy to be slipped over it.

Avoid drilling holes in the ceiling or walls to hang the canopy using the cords provided.

Features:

• 4 white lacquered steel corner brackets.
• Length of one side of a bracket: 14 cm to 18 cm
• Section of battens: 45x45 mm or 35x35 mm
• Weight: approximately 0.8 to 1.2 kg per bracket
• 12 battens not included, to be purchased separately