• Baldaquin SAFECAVE BSP1/BSP2 YSHIELD - Pyramidal 1 ou 2 personnes
  • Baldaquin SAFECAVE BSP1/BSP2 YSHIELD - Pyramidal 1 ou 2 personnes

SAFECAVE BSP1 YSHIELD canopy at €634 including VAT - Pyramidal, for 1 person

€528.33

(Prices incl. VAT, except outside the EU)

SAFECAVE BSP1 YSHIELD Canopy - Pyramidal 1 person

 

High-frequency protection against 5G/WIFI/DECT/... (-44dB at 1 GHz).... and low-frequency electric fields.

You may also like

SAFECAVE BSP1 YSHIELD Canopy - Pyramidal 1 person

 

High frequency protection 5G/WIFI/DECT/etc (attenuation of approximately 44dB at 1 GHz) .... and electric fields

 

The YShield BSP1 / BSP2 | SAFECAVE high-frequency wave and low-frequency electric field protection canopy protects against both high-frequency radiation (from mobile phones, 5G, DECT cordless phones, Wi-Fi, Wimax, Bluetooth, radars, etc.) and low-frequency electric fields.

 

SAFECAVE BSP1 canopy for single beds

  • Suitable for single beds up to 100 cm wide, 200 cm long and 40 cm high
  • Entry via an opening with an overlapping flap.

 

It is strongly recommended that you use an anti-wave floor mat to create a Faraday cage, both for protection against high frequencies (if the floor is not directly on the ground or a thick layer of concrete, etc.) as well as for electric fields (model STEEL-TWIN (U1S or U2S), or RIPGRAY100, or NICU110 or HNG80 (BU2 or BU3)).

 

It is also strongly recommended to ground the canopy (grounding measurement less than 10 ohms) with a CMT4 or CMT10 grounding kit or the YSHIELD kits in the Grounding Accessories tab, in particular with the GFGMY YSHIELD kit for canopy and mat or the GCM1E Yshield kit for canopy or mat, or the GCM2E Yshield kit for the canopy AND the mat.

 

 

Technical specifications:

 

  • Attenuation -44 dB at 1 GHz according to graph based on ASTM D4935-10 or IEEE Std 299-2006.
  • Composition: 80% nylon, 20% silver
  • Colour: silver beige
  • Breathable fabric
  • Hand wash only, do not spin dry (avoid washing and moisture, which will eventually cause the fabric to oxidise

 

 

 

Please note the quality of this fabric:

- Some parts of the fabric may be stained (we do not know the origin according to the supplier, which may be related to oxidation, oil, manufacturing treatment, silver plating on nylon, etc.). The product is delivered as is, with the customer's full knowledge and agreement.

- However, this condition does not affect the attenuation capacity.

- If the customer would like a silver/nylon fabric without any stains, we would invite them to choose the ULTER -70dB fabric (which also provides significantly greater attenuation for high frequencies).

 

Note: Canopy on firm order

 

  • Condition
    New
Loading...