SAFE and SOUND PRO 2 rental (200 MHz to 8 GHz) at €40 including VAT (2 weeks) + €440 deposit including VAT

SAFE & SOUND PRO 2 (200 MHz to 8 GHz) rental for €40 - 2 weeks + €440 deposit

The rental period is for 15 days, or longer if necessary for the customer.

The deposit will be refunded to the payment method used after the device is returned.

5G/4G/3G/Wi-Fi/relay antenna wave detector and meter with audio monitoring of waves (200 MHz to 8 GHz with readings in V/m and µW/m² (peak and average power). In our opinion, this is a very good device.

The Acoustimeter AM11 replaces the AM10 model. It has been redesigned and optimised to correctly measure high 5G frequencies (below 8GHz).

Its sound demodulation allows you to identify the types of waves being measured. It is a useful tool for understanding your high-frequency environment and taking the necessary steps to protect yourself if necessary.

The display is on an LCD screen, plus two rows of LEDs showing peak electric field strength (V/m) and power density (µW/m²).

It covers frequency spectra such as: TETRA, GSM, DCS, RADARS, DECT, UMTS/3G, 4G/LTE, 5G, Wi-Fi (2.4 and 5.1 GHz), Wimax, etc.

It has high sensitivity starting at 0.02 V/m and an audio output for recording the different characteristic modulations of high-frequency or microwave sources, if necessary.

It is very useful for people who are electrohypersensitive (EHS). More information

The acoustimeter has been designed to enable you to assess the degree of exposure to high frequencies very quickly and accurately.

It is a wideband frequency device that covers most of the transmitters that we can find in our environment. The Acoustimeter is the result of many years of experience in the practical measurement of high frequencies and microwaves.

Readings are displayed quickly on both the LCD screen and the two graduated LED scales. The LEDs update rapidly, allowing you to determine the level of exposure in an area and find the "hot spots" where waves are concentrated. The LCD screen offers high accuracy and very fast updating, giving you time to take note of the readings. It also has a loudspeaker (and an audio output for headphones or a recorder) so that, with a little practice, you can determine the types of devices or sources that emit microwaves or high frequencies. The sounds produced by different emitters may change over time. Therefore, they are provided for informational purposes only. If you are exposed to a multitude of high-frequency radiation sources, the sounds may be intermingled and less easy to identify. However, moving around the space will allow you to identify them more clearly.

Technical specifications:

The two lines on the LCD screen provide the following information:

• Peak exposure level in V/m
• Peak hold in V/m » Average exposure level in µW/m²

Two rows of LEDs provide the following information:

• Peak exposure in V/m
• Average exposure in µW/m²

Measured frequency band: 200 - 8000 MHz ±3 dB

Sensitivity* (Peak screen): 0.02 V/m - 6.00 V/m

Sensitivity* (Average screen) - (average): 1 µW/m² - 100,000 µW/m²

Pulsed signals are audible thanks to the built-in loudspeaker Power supply: 2x AA alkaline or rechargeable batteries (1.2 - 1.5V)

Current-voltage: 105 mA at 3 V

Battery life: 20 hours (15 hours with two new 1500 mAh AA alkaline rechargeable batteries and 25 hours with two 2700 mAh NIMH rechargeable batteries 

Manual in French, batteries included, carrying case.

Size (mm): 190 x 102 x 33 (WxHxD)

Weight: 280g