Pack PS840TE: SAFE & SOUND pro 2 + ME3840B + TOHM-E + K2

AM840TE Pack: SAFE & SOUND Pro 2 + ME3840B + TOHM-E + K2 Case

Measures high and low frequencies from 16Hz to 100KHz and from 200MHz to 8GHz.

SAFE & SOUND PRO 2 (2 MHz to 8 GHz) - 5G calibrated meter.

5G/4G/3G/Wi-Fi/relay antenna waves with audio monitoring of waves and indication in µW/m².

The SAFE & SOUND PRO 2 is a measuring instrument from 200 MHz to 8GHz that is both audible for easy identification of high-frequency sources (microwaves) and visual: LCD screen display showing the maximum, instantaneous measurement, and average measured in (µW/m²). This device is certified calibrated, which is very rare.

It covers frequency spectrums such as: TETRA, GSM, DCS, RADARS, DECT, UMTS/3G, 4G/LTE, 5G, Wi-Fi (2.4 and 5.1 GHz), Wimax, etc.

It is highly sensitive and therefore very useful for people who are electrohypersensitive (EHS).

It is a wideband frequency device that covers most of the transmitters that we can find in our environment.

Technical specifications:

• Measured frequency band: 200 - 8000 MHz ±6 dB Measuring range: 0.001 µW/m² to 2,500,000 µW/m²
• Power supply: 2x AA alkaline or rechargeable batteries (1.2 - 1.5V)
• Current-voltage: 105 mA at 3 V
• Battery life: 10 to 15 hours
• Batteries included
• Size (mm): 17 x 11 x 4 cm (WxHxD)
• Weight: 400g

ME3830B GIGAHERTZ SOLUTIONS

It is the ideal device for amateur technicians. It is particularly easy to use. It meets the requirements of habitat biology and allows you to determine the actions to be taken, the remedies and the monitoring of their effectiveness, i.e. it includes the higher frequencies produced, for example, by energy-saving lamps, current transformers, electronic light intensity dimmers, monitors,

• Frequency range: 5 Hz - 100 KHz (compensated, better than -2 dB)
• Measuring range: Magnetic flux density (one-dimensional): 1 - 1999 nT 
• Electric field strength: 1 - 1999 V/m Accuracy: +/- 2%, +/- 20 digits @50/60Hz
• Switchable internal filter for analysing different frequency bands: 5 Hz to 100 KHz / 16 Hz / 50 Hz to 100 KHz / 5 Hz to 100 KHz), including PLC (Power Line Communication) / Linky radiation
• Sensor: E probe for measuring LF electric fields - B probe for measuring LF magnetic flux density 
• Audio analysis: An acoustic signal proportional to the field intensity, similar to a "Geiger counter effect", helps to identify areas of high exposure. 
• Power supply: 9-volt alkaline manganese battery Average operating time of 24 to 36 hours "Low Batt." energy level indicator on the screen 
• Auto-power-off function 
• Signal evaluation: RMS 
• Other questions: 2-year warranty 
• Weight: 0.42 kg

• Measuring device 
• Ground connection cable 
• Alkaline manganese battery 
• Detailed operating manual and useful information

TOHM-E

Earth loop controller/measurer.

It indicates the earth resistance in Ohms, its compliance, marks the position of the phase, checks the continuity of the earth connections and verifies the compliance of the connection (Advantage: It is calibrated with certification!).

Best value for money and compact size.

Technical specifications:

• Earth controller/measurer using the fault loop method.
• Rotating head Display with colour-coded fault indications (red/blue).
• Phase/neutral direction indication and earth connection presence indication.
• TRMS voltage measurement.
• Measuring ranges: 0-2kOhm, 50-440V RMS.
• For TT installations only.
• Safety: CAT III 300V.
• Compliance: NF C 15-100, IEC61557-1/3, IEC61010-1
• Supplied with calibration certificate
• Dimensions (HxWxD) (mm): 170x75x63 mm Net weight: 275 g

K2 GIGAHERTZ SOLUTIONS case

Foam with compartment

Dimensions: 33 x 27 x 16 cm