PRO54 YShield anti-electromagnetic wave paint

PRO54 Yshield paint (1 litre at £45 including VAT, 5 litres at £210 including VAT, 10 litres at £415 including VAT, 20L at €825 incl. VAT), protects against electromagnetic waves from -35dB to -100dB from 10 MHz to 40GHz for EXTERIOR use against high frequencies (5G relay antennas, Wi-Fi) and low-frequency electric fields

Graphite-free paints with strong acrylic binder for outdoor coating, i.e. 4.8 N/mm2, also providing excellent adhesion for the top coat and protection against the elements.

YShield® wall paints protect your home from external electromagnetic fields, whether high frequency (relay antennas, Wi-Fi, Wimax, satellites, radar, DECT, wireless telecommunications networks, microwave repeaters, etc.) or low frequency (EDF electrical power lines, etc.).

They create a shielded enclosure (Faraday cage) where external electrosmog (electromagnetic fog) can hardly penetrate your home.

This paint is certainly the most effective currently available. Unlike other paints, these paints do not use metal compounds, but only carbon, which acts as a conductor.

The paint therefore does not oxidise and, more importantly, it prevents excessive re-emissions in the home from sources inside the home that can emit electromagnetic fields.

They can be used indoors or outdoors and are environmentally and health friendly, as they do not use solvents or toxic chemical additives. They are applied in the same way as conventional paints.

They are also used for shielding:

• Strategically sensitive rooms where computer and frequency data must not be leaked to the outside.
• Electronic components to prevent high-frequency interference between multiple components and enable HF compatibility.

Features:

• Biocompatible and hypoallergenic: contains no metal, solvents or toxic chemical additives # Resistant and tear-resistant
• Binder: acrylic
• Handling and application comparable to standard paint
• Washable with water
• Antistatic
• Application surface: plaster, cement, cob, existing paint. Surfaces must be degreased and carefully prepared to remove any porous roughness. A primer may be necessary
• Application technique: brush, paint roller, paint sprayer
• Application conditions: above 5°C, dry weather, drying time = 12 to 36 hours depending on temperature. Ideally, YShield® paints should be covered with 2 coats of water-repellent latex paint outdoors and 2 coats of latex, vinyl or acrylic paint indoors. After shielding rooms with YShield® paint, an electrical differential must be installed to avoid any risk of overvoltage. The electrical current must be turned off in the home before any work with YShield® paints.
• Earthing: YShield® paints must be earthed using YShield® earthing kits for exterior and interior paints.
• We accept no liability for damage caused to persons, animals or objects by incorrect application of the paint, in particular grounding and electrical installation that does not comply with DIN 57100 / VDE 0100 standards. We recommend that the electrical installation and grounding of YShield® paints be checked by a qualified electrician.
• Attenuation efficiency: - - - High frequencies: -30dB for 1 litre per 3.75 m² and -40dB for 1 litre per 7.5 m² - - - Electrostatic fields: 99% attenuation - - - Electric fields, low frequencies: 99% - Ideal for attenuation in future high-frequency telecommunications industry applications (excellent attenuation up to 18 GHz) --- Standards D4935-10 ASTM, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698 / A698M-07

• Ingredients: Water, carbon, acrylic base, additives, MIT & BIT preservatives

• VOC; 0.2 g/l VOC
• pH: 8

Emissions concerned:

• GSM/DCS/GPRS/UMTS cellular telephone network
• DECT cordless telephone
• WLAN
• WiFi
• Bluetooth
• Microwave (microwave oven leakage)
• Satellite transmission
• Radar
• WiMAX
• Radio
• Tetra
• CB
• 50Hz electrical current

YShield® paints have various applications:

1. Military: shielding of highly confidential sites to prevent data transmission hacking.
2. High-tech industry: shielding electronic components to resolve electromagnetic compatibility issues
3. Medical: shielding of rooms or specific medical equipment with high electromagnetic radiation to protect healthcare professionals and patients. YShield® paints offer a range to suit all needs.

YShield® paints contain no toxic solvents, plasticisers or toxic components, only very small amounts of initial volatile organic compounds in order to comply with the most stringent ecological housing standards. The attenuation graphs are certified by the University of Munich of the German Armed Forces.

Shielding of glass surfaces:

Glass surfaces must also be shielded so that high and low frequencies cannot penetrate through them. We recommend using HFshield fabric for high-frequency attenuation and low-frequency electric fields. Description of YShield® grounding kits:

Grounding Kit (ES):

All painted surfaces must be grounded. This kit is specially designed for grounding YShield® paints.

Interior connection tape (EB):

This connecting tape ensures that all surfaces painted with YShield® paints inside an enclosed room remain earthed in the event of a crack. It is self-adhesive. Length: 10 m, width: 2 cm, thickness: 0.06 mm.

External connection tape (LB):

This connecting tape ensures that all surfaces painted with YShield® paints outside a home or room are earthed in the event of cracks. It is tear-resistant and weatherproof. Length 10 m, width 17 mm, thickness 0.8 mm, hole diameter: 5 mm.