NATURELL ULTRA Swiss Shield Canopy 2-person Cabin

2 persons - Cabin: Okotest standard organic fabric

Attenuation: -40dB at 1Ghz and -52dB at 100 Mhz

Dimensions: 2.2 m long x 2.2 m wide x 2.2 m high

The Baldaquin -52dB Naturell Ultra Swiss Shield® "Faraday cage" is the superior model of the Baldaquin -50dB Naturell Swiss Shield® with CONDUCTIVE mesh components. It is biocompatible for people who are sensitive to chemicals.

It very easily discharges the electric fields (known as low frequencies) that it receives through the conductivity of its mesh, thanks to an optional CMT4, CMT10, GCM1 or GCME2 grounding cable.

Ideally, the canopy should consist of a ground mat and a grounding cable. The ground mat is not necessary if the floor of the room has no rooms below it (basement, rooms), as high frequencies do not pass through solid ground.

The mat creates a closed enclosure to form a Faraday cage, thereby eliminating the penetration of electric fields (low frequencies) and attenuating the penetration of high-frequency fields from wireless telecommunications.

It provides protection against electromagnetic fields from the following applications:

• GSM/DCS/GPRS/UMTS/LTE 4G/5G cellular telephone networks
• DECT cordless telephone
• WLAN
• Wi-Fi
• Bluetooth
• Microwave (microwave oven leaks)
• Satellite transmission Radar
• WiMAX
• Radio
• Tetra
• CB
• Electric fields from electrical current if connected to earth

It is made of cotton and metal.

• Conductive fabric (conductive carbon-coated threads) for better grounding.
• Biocompatible.
• It contains little metal, thus avoiding any possible poisoning from excessive metal content when the metal oxidises through respiration by the lungs once the body is in the Faraday cage.
• Hypoallergenic
• Antiseptic
• Highly breathable
• Washable
• Resistant
• Highly luminous
• Resistant and tear-resistant
• Easy to handle and use Antistatic
• Designed for people with chemical sensitivities (hypoallergenic) Materials: 82% cotton / 1% silver / 17% copper / 1% carbon / polyester
• Thickness: 0.1 mm
• Colour: white
• Approximate weight: 115 g/m²

We can produce customised shapes. The Cabin model can be made with or without a side opening to make it easier to fit into the Canopy.

The Cabin Canopy is installed using four cords suspended from the corners of the ceiling.

Loops around the top of the canopy also allow tubes to be inserted into the sides of the canopy to tension it.

An additional alloy hoop kit, consisting of two self-supporting hoops, creates a dome-shaped Faraday cage. The Canopy then rests on the floor without needing to be suspended from the ceiling. This kit allows the Canopy to be moved to the desired location and repositioned as required. Very useful for travelling, it can be assembled in a few minutes. (on request only)