SAFE and SOUND PRO mmWAVE 5G detector (20 to 40 GHz) for £985 including VAT + free shipping

SAFE and SOUND PRO mmWAVE 5G detector (20 to 40 GHz) at £985 including VAT for measuring 5G telecommunications, microwave links and Wimax for millimetre waves between 20 and 40 GHz.

With audio monitoring of waves with indication in V/m (already preset) or in µW/m².

The SAFE & SOUND PRO mmWAVE is a high-frequency measuring instrument from 20 to 40 GHz, both audible for easy identification of sources and visual, mainly for 5G telecommunications waves and microwave links: LCD screen displaying the maximum, instantaneous measurement and average measured in (µW/m² and V/m).

It includes a semi-omnidirectional stub antenna required for these frequency measurements. 

This device is certified calibrated, which is very rare.

It covers frequency spectra such as: 5G, microwave beams, Wimax, etc.

It is highly sensitive and therefore very useful for people who are electrohypersensitive (EHS).

It is a wideband frequency device that covers most of the transmitters that we can find in our environment for millimetre waves.

The device has been preset to V/m units. However, you can switch to µW/m² units at any time as shown below:

Changing between V/m and µW/m² mode

1. With the device switched off, press the Max reset button and the top left button simultaneously to switch to ON. µW/m² will then be displayed.

2. Switch off the device by setting the upper left button to Off. Then switch the device back on to On. µW/m² will then be displayed.

Follow the same procedure to switch back to V/m.

Technical specifications:

Measured frequency band: 20 - 40 GHz

Audio demodulation: loudspeaker

Antenna: Semi-omnidirectional stub

Power supply: 2x AA alkaline or rechargeable batteries (1.2 - 1.5V)

Current-voltage: 105 mA at 3 V

Battery life: 10 to 15 hours

Size (mm): 17 x 11 x 4 cm (WxHxD)

Weight: 400g